Water Cooled Kickless Cable

VR METALS AND ENGINEERS ISO 9001:2015 CERTIFIED COMPANY WE ARE MFG.
Water Cooled Kickles/Jumpers are extra more flexible rope type secondary conductors with connector, swage- formed on each end for maximum flexibility & cooling.
Design of Kickless Cable as per Customers Specification & Requirement and drawings.

High flexibility for good working efficiency.Special type of Rubber hose with the good flexibility and its Pressure Capacity more than 10 Kg/cm2 and protect to high temperature water for safe operation. Covering of good pressure resistance, heat resistance, wear resistances.Excellent cooling effect even in continued welding operation.Fantastic water testing units with Pressure 10 to 12 Kg/cm2, Each & every cable is tested.Little Impedance & little Reactance drop.Copper wire size is 33 Gauge for 300 MCM & 400 MCM as per Standard of RWMA.Accurate copper straight lug or copper bend lug with 100% Conductivity of copper.High resistance of repeating kicks & bending caused by electromagnetic force introduced by the welding current & welding operation, according long life.Good Quality product with Long Life and reasonable rate. Long cable life reduces. cable cost per weld – the true measure of cost cable. Easy for check & replacement & maintenance.The kickless cable is a consuming part required to be inexpensive. Immediately service is our motto.

The standard terminal width is 32 mm. if wide terminal is required, please specify when ordering.

Terminals
Terminals are made for soft electrolytic copper tube.
Wire construction: - This is made from 0.05 mm2 electrolytic grade copper wire each bunch of herringbone construction to reduce the rate of wire fracture by providing the lateral surface wear areas. It is a total sectional area shall not be less than the appropriate sectional area per MCM/mm2 rating
Wire connection to Terminals: - Wires are brazed crimped in the soft electrolytic copper Tube. Wire can not melt out during brief overheads.
Flexible cover: - A loosely fitting rubber impregnated sheath encases most Cable styles for mechanical protection.
Optional feature
Protection sleeves: - In order to eliminate breakage of strands due to the frequent acute bending operation, protection sleeves are, provided on the area of both the terminals joints.